Cleaning and care of natural wood floors

Please note our cleaning and care tips

Dirt, dust and small stones can scratch the surface and damage the wood over time. That’s why the basis of every parquet care is simple cleaning.

1. Sweep and vacuum properly

It is gentlest on the floor if you sweep it with a broom. When using a vacuum cleaner, an attachment with an integrated brush should be used. In this way, dust and dirt are gently removed from the floor surface and greater contamination or damage can be prevented.

2. It depends on the rag

Avoid non-professional microfiber cloths. These can sand down the wood and damage the protective surface. If in doubt, use a good old cotton rag.

3. Wet cleaning with moderation and purpose

Moist mopping is sufficient – please never drown the floor in too much water.

4. Wait and drink tea

After wet cleaning, the parquet floor must dry completely. This takes about 30 minutes.

The surface should not be walked on during this time.

5. Re-oiling

6. Professional basic cleaning

A professional basic cleaning should be carried out after a few years. This can refresh the color and give it a new shine. To do this, the floor is First deep cleaned with a cleaning machine. A fresh layer of oil is then applied. This basic cleaning should be carried out by a professional to ensure the shine and durability of the parquet.

If you have any questions, please contact our service team